HIKVISION HiWatch Series User Manual page 79

Step 1 Go to Linkage Action interface of the alarm input or event detection.
Step 2 Click Trigger Alarm Output.
Step 3 Select the alarm outputs to trigger.
Step 4 Go to Configuration > System > Event > Normal Event > Alarm Output.
Step 5 Select an alarm output item from the list. Refer to Alarm Output for the alarm output
settings.
Configure PTZ Linkage
Purpose
Video recorder can trigger the PTZ actions (e.g., call preset/patrol/pattern) when the alarm event,
or VCA detection events occur.
Make sure the PTZ or speed dome connected supports PTZ linkage.
Step 1 Go to Linkage Action interface of the alarm input or VCA detection.
Step 2 Select PTZ Linkage.
Step 3 Select the camera to perform the PTZ actions.
Step 4 Select the preset/patrol/pattern No. to call when the alarm events occur.
You can set one PTZ type only for the linkage action each time.
Digital Video Recorder User Manual
Figure 6-23 PTZ Linkage
79