HIKVISION HiWatch Series User Manual page 50

 Full Screen Monitoring Dwell Time: Set the time to show alarm event image.
 Enable Audio Output: Turn on/off audio output for the selected video output.
 Volume: Adjust the live view, playback, and two-way audio volume for the selected video
output interface.
Step 3 Click Apply.
Configure Live View Layout
Step 1 Go to Configuration > System > Live View > View.
Step 2 Select Video Output Interface to configure.
Step 3 Click to select a window and click a camera No. in the camera list you would like to display.
means no camera is displayed on the window.
Step 4 Optionally, click
Click to stop live view of all the cameras.
Click or
Step 5 Click Apply.
Configure Channel-Zero Encoding
Purpose
Enable the channel-zero encoding when you need to get a remote view of many channels in real
time from a web browser or CMS (Client Management System) software, in order to decrease the
bandwidth requirement without affecting the image quality.
Step 1 Go to Configuration > System > Live View > General.
Step 2 Set Video Output Interface as Channel-Zero.
Step 3 Go to Configuration > System > Live View > Channel-Zero.
Step 4 Check Enable Channel-Zero Encoding.
Digital Video Recorder User Manual
to start live view of all the cameras in order.
to go to the previous or next page.
Figure 6-3 Channel-Zero
50