Danfoss CCR2 Installation Manual page 12

Installation Guide
10. SCH setting: weekly schedule programme menu settings (code 760)
12
SMT/SI
CCR2
No LCD Display INSTALL MENu - FuNCTION DESCRIPTION
65 CCR2 is Status of CCR2:
Register - functions only as temperature registration
... ... .
Reg+Dis - functions as disinfection control with temperature registration
Factory setting: Reg+Dis
66 Reset Reset to factory settings
yes - return to factory settings
... ... .
No – keep adjusted settings
Note: To complete reset procedure turn CCR3 off and back on.
67 Ecs? Exit windows from Install Menu. Enter "+" to close setting or basic menu will close automatically after
+ YES 4 minutes
From ACCESS CODE menu enter code: 760
(procedure in chapter 7). The Schedule menu is
displayed as in the table below.
The arrow keys "▲/▼" move the menu windows,
the "+/ - " keys change the values in the window
selected by the arrows.
No LCD Display PRG - SCHEDuLE PROGRAMME MENu - FuNCTION DESCRIPTION
68 Schedule Information about menu: Schedule
Menu
69 P1 Start Programme P1 starts time "hour" for the weekly schedule. The same settings apply for programmes
10: 20 P2 ... P7.
70 P1 Start Programme P1 starts time "minute" for the weekly schedule. The same settings apply for programmes
10: 20
P2 ... P7.
71 P1 Stop Programme P1 stops time "hour" for the weekly schedule. The same settings apply for programmes
10: 20 P2 ... P7.
72 P1 Stop Programme P1 stops time "minute" for the weekly schedule. The same settings apply for programmes
10: 20
P2 ... P7.
73 P1 Activ Sets the activity of the entire P1 programme and its activities for individual days of the week.
A12 - - - 67 The arrow keys"▼/▲" navigate the cursor through the digits. The "+/ - " keys change the digit values.
Figures 1 ... 7 represent days of the week:
1 – Monday, 2 – Tuesday ... 7 – Sunday.
The first setting to the left can be A or N:
A – Programme P1 is active - subsequent settings are read,
N – Programme P1 is entirely deactivated - subsequent settings 1 ... 7 are dismissed, and the
programme is not started.
The second left setting:
1 – Programme P1 is activated on Monday.
" - " – Programme P1 is not activated on Monday.
The third left setting:
2 – Programme P1 is activated on Tuesday.
" - " – Programme P1 is not activated on Tuesday.
The fourth left setting:
3 – Programme P1 is activated on Wednesday.
" - " – Programme P1 is not activated on Wednesday.
The fifth left setting:
4 – Programme P1 is activated on Thursday.
" - " – Programme P1 is not activated on Thursday.
The sixth left setting:
5 – Programme P1 is activated on Friday.
" - " – Programme P1 is not activated on Friday.
The seventh left setting:
6 – Programme P1 is activated on Saturday.
" - " – Programme P1 is not activated on Saturday.
The eighth left setting:
7 – Programme P1 is activated on Sunday.
" - " – Programme P1 is not activated on Sunday.
The same Activity settings apply for programmes P2..P7.
74 Ecs? Exit windows from Install Menu. Enter "+" to close setting or basic menu will close automatically after
+ YES 4 minutes
To exit the setting menu, press the up arrow
key after changing the last setting. The settings
menu is closed automatically after 4 minutes of
inactivity.
Entrance to the Menu Settings discontinue
disinfection process and alarm signal.
VI.D1.E2.1R Heating Solutions