7. Using a 1/8-in. (3-mm) flat-blade (–) screwdriver, tighten the screws on each side of the Mini-PIM
faceplate.
8. Remove the cover from the SIM slot, SIM 1. Insert the SIM card into the SIM slot. You can use the
other slot, SIM 2, for installing a secondary or backup SIM.
9. Replace the cover over the SIM slots.
10. Attach the antennas to the antenna base. Connect the cables from each antenna base to the SMA
connectors on the Mini-PIM. See
Figure 13: Attaching the Antennas
The antenna base is magnetic and can be attached to the rack directly, if the rack is metallic. Else, you
can mount the antenna base on the rack using the mounting brackets. See
Figure 13 on page
82.
Figure 14 on page
83.
82