Juniper SRX300 Manual

How to Set Up Your SRX300 Services Gateway
The SRX300 Services Gateway consolidates security, routing, switching,
and WAN interfaces for small retail offices. With advanced threat mitigation
capabilities, the services gateway provides cost-effective and secure
connectivity.
With a desktop form-factor chassis, the SRX300 Services Gateway has six
1-Gigabit Ethernet ports, two 1-Gigabit Ethernet SFP ports, 1 USB 3.0 port,
Console port (RJ45 and mini-USB), 4 GB of DRAM memory, and 8 GB of
flash memory.

Package Contents

Verify that you have the following parts available:
• SRX300 Services Gateway
• RJ-45 cable with DB-9 adapter
• USB cable
• Power supply adapter
• Power cable
• Warranty and registration information
• End User License Agreement
• Quick Start Guide

Front Panel

Reset Config Serial Console
button port
Power LEDs USB Mini-USB
button port Console port

Back Panel

Grounding Lock
point
NOTE: The SRX300 Services Gateway shipment package contains a
packing list. Check the parts in the shipment against the items on the
packing list. If anything is missing or damaged, contact your Juniper
Networks customer service representative.
Specification
Dimensions (D x W x H)
Chassis weight
Average power consumption
Average heat dissipation
Relative humidity
1G 1G SFP
Ethernet ports ports
ESD
point
Cable tie DC input
holder
Value
7.52 in. x 12.63 in. x 1.37 in.
(19.10 cm x 32.08 cm x 3.48 cm)
4.38 lb (1.99 kg)
24.9 W
85 BTU/hr
5% to 90%, noncondensing
1