Juniper SRX300 Series Reference Manual page 117

wpa-enterprise—The device authenticates through an 802.1X-compliant RADIUS server.
user@host# set wlan access-point name radio [1|2] virtual-access-point id security wpa-enterprise
cipher-suites ccmp
user@host# set wlan access-point name radio [1|2] virtual-access-point id security wpa-enterprise
radius-server ip-address
user@host# set wlan access-point name radio [1|2] virtual-access-point id security wpa-enterprise
radius-port port
user@host# set wlan access-point name radio [1|2] virtual-access-point id security wpa-enterprise
radius-key secret-key
user@host# set wlan access-point name radio [1|2] virtual-access-point id security wpa-enterprise
wpa-version v2
wpa-personal—The device uses preshared keys (PSKs) or a passphrase for authentication and
encryption. Keys are stored on the device and on all wireless clients. You do not need to configure
a separate authentication server.
user@host# set wlan access-point name radio [1|2] virtual-access-point id security wpa-personal
cipher-suites ccmp
user@host# set wlan access-point name radio [1|2] virtual-access-point id security wpa-personal
key-type [ascii|hex]
user@host# set wlan access-point name radio [1|2] virtual-access-point id security wpa-personal
key key
user@host# set wlan access-point name radio [1|2] virtual-access-point id security wpa-personal
wpa-version v2
d. Specify the upload and download rate limits:
user@host# set wlan access-point name radio [1|2] virtual-access-point id upload-limit
upload-limit-rate
user@host# set wlan access-point name radio [1|2] virtual-access-point id download-limit
download-limit-rate
e. Specify the maximum number of clients that can be connected to the VAP:
user@host# set wlan access-point name radio [1|2] virtual-access-point id maximum-stations
number
f. Commit the configuration:
user@host# commit
119