About The Documentation; Documentation And Release Notes; Using The Examples In This Manual - Juniper SRX300 Series Reference Manual

About the Documentation

IN THIS SECTION
Documentation and Release Notes | ix
Using the Examples in This Manual | ix
Documentation Conventions | xi
Documentation Feedback | xiv
Requesting Technical Support | xiv
Use this guide to understand the specifications and perform the basic configuration for the interface
modules supported on the SRX300 Series and SRX550 High Memory Services Gateways. After
understanding the support and compatibility information, and completing the configuration procedures
covered in this guide, refer to the Junos OS documentation for information about further software
configuration.

Documentation and Release Notes

To obtain the most current version of all Juniper Networks
documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.
If the information in the latest release notes differs from the information in the documentation, follow the
product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.
These books go beyond the technical documentation to explore the nuances of network architecture,
deployment, and administration. The current list can be viewed at https://www.juniper.net/books.

Using the Examples in This Manual

If you want to use the examples in this manual, you can use the load merge or the load merge relative
command. These commands cause the software to merge the incoming configuration into the current
candidate configuration. The example does not become active until you commit the candidate configuration.
®
technical documentation, see the product
ix