Juniper SRX300 Series Reference Manual page 119

Table 62: Commands to Verify and Monitor the Status of the Wi-Fi Mini-PIM (continued)
Command
show wlan access-points
show wlan access-points ap-name
client-associations
show wlan access-points ap-name
virtual-access-points all
Purpose
Displays the details of all the access points configured on the Mini-PIM.
Sample:
Active access points information
Access-Point Type Interface Radio-mode/Channel/Bandwidth
wap3 Int
Displays the details about the clients connected to the access point.
Access point client associations information
Access point: wap3
VAP Client MAC Address
Bytes Rx/Tx
Radio1:5g_vap1 00:00:5e:00:53:a3
510/0
Displays details about the virtual access points.
Virtual access points information
Access point name: wap3
Radio1:
VAP1:
SSID
MAC Address
Maximum Station
Broadcast SSID
Station Isolation
Upload Limit
Download Limit
VLAN ID
Station MAC Filter
Traffic Statistics:
Input Bytes
Output Bytes
Input Packets
Output Packets
wl-2/0/0 acn/120/40, gn/11/20
Auth
NO
: 5g_vap1
: 00:00:5e:00:53:12
: 127
: Enable
: Disable
: Disable
: Disable
: 0
: Disable
: 0
: 0
: 0
: 0
121
Packets Rx/Tx
3/0