Juniper SRX300 Series Reference Manual page 74

SIM lock and unlock capability
Always-on, dial-on-demand, and backup modes
Over-the-Air upgrade for modem firmware
Figure 10 on page 76 shows the front panel of the LTE Mini-PIM.
Figure 10: LTE Mini-PIM Front Panel
Table 45 on page 76 lists the components on the front panel of the Mini-PIM.
Table 45: LTE Mini-PIM Front Panel Components
Component
Antenna connectors
Mini-USB port
SIM slots
LEDs
The LTE Mini-PIM supports two multi-band swivel-mount dipole antennas, which can be rotated 360 °.
You can rotate the antennas and select the angle at which the signal strength is high.
lists the specifications for the antenna.
Table 46: Specifications for the LTE Mini-PIM Antenna
Specification
Part number
Operating frequency range
Description
Two SubMiniature version A (SMA) connectors.
Mini-USB Type-B port for monitoring and troubleshooting.
Two slots, SIM1 and SIM2, for inserting the SIM cards. The LTE Mini-PIM supports
mini, micro, and nano SIMs. The mini-SIM can be inserted directly in the SIM slot. To
insert micro and nano SIMs, use the SIM adapters supplied with the Mini-PIM. The
Mini-PIM is shipped with two SIM adapters.
Indicate the status at a glance. For details on the LED indications, see
Interface Module LEDs" on page
Value
EDA-2010-4G0R2-A2 (Vendor: MAG.LAYERS)
79.
704~960 MHz
1710~2700 MHz
"LTE Mini-Physical
Table 46 on page 76
76