Barco Graphics 808s Owner's Manual page 50

Messages, warnings and failure codes
WARNING :
go to
stand by
WARNING :
invalid
frequency
input
WARNING :
default
settings
loaded in
the E2PROM
table is
deleted
FAILURE
invalid
RWI soft
version
FAILURE
I C error
2
addr. : 7FH3
FAILURE
short
circuit on
I C bus
2
8-2
All manuals and user guides at all-guides.com
Projector will switch to 'stand-
by' when the RCVDS is no longer
available.
The entered frequency or ap-
plied frequency of the source is
out of the projector's range.
Adjustment settings are lost. Re-
load using Projector Control Soft-
ware via PC or MAC (if this option
is available), or readjust image.
Message to inform that selected
table is deleted. This message
will be followed by 'confirm mes-
sage' , on which the user has to
answer.
Wrong software version in your
projector. Call for technical sup-
port.
Hardware failure. Call a quali-
fied service technician for re-
pair.
Hardware failure. Call a quali-
fied service technician for re-
pair.
FAILURE
Serial communication error be-
RCVDS com-
tween RCVDS and projector.
munication
error
FAILURE
Hardware failure. Call a quali-
RWI commu-
fied service technician.
nication
error
FAILURE
Communication error between
IRIS commu-
IRIS and the projector. Call a
nication
qualified service technician.
error
Message during the start up of
WAIT
the IRIS. Message will disappear
starting
when the IRIS is ready to accept
up
commands.
IRIS
5976283 BARCOGRAPHICS 808s 160501