Table of Contents
Advertisement
Start working with VEGA-2001
2.1 Accessing the Module Across Wired Network Using the Web Browser
1.
The default IP address of the Ethernet port is 192.168.1.10
2.
Please setup your PC to the same domain to connect VEGA-2001 (192.168.1.x)
3.
Start the Web browser on your PC and type in 192.168.1.10 in the URL address bar
4.
The Live page should be displayed as below.
2.2 Upgrading Firmware
The VEGA-2001 firmware can be automatically updated by connecting VEGA-2001 to your PC using the
mini USB port.
1. Prepare an empty USB flash drive.
2. Download or get firmware file from your Advantech contact.
3. Put firmware file, "vega2001_XXXX.upd.xz" to your USB flash drive.
4. Insert your USB flash drive to the VEGA-2001 and remove other devices (LAN & video input source,
except the power adaptor) .Then, press the power button
5. Please remember to remove the USB flash drive.
6. Check the software version from Web, System → Information → Software version
Page
9
of
27
Advertisement
Table of Contents
