Led For Video Source Connection - Advantech VEGA-2001 Quick Start Manual

[NOTE]
⚫
After turning on the power of VEGA-2001, if you insert the USB with the firmware file within 40
seconds, VEGA-2001 will execute the update firmware. After finishing the firmware update,
VEGA-2001 will be powered off.

2.3 LED for Video Source Connection

There are two LED which can indicate connection status of video source. Below is LED behavior table
for reference.
⚫
LED Status Table
Video Source
HDMI(FPGA_D1)
12G SDI(FPGA_D2)
⚫
LED Location
Non-Connected
Light-on
Light-on
Page 10
Connected
Light-blink
Light-off
of 27