Start Working With Vega-2002; Accessing The Module Across Wired Network Using The Web Browser; Upgrading Firmware - Advantech VEGA-2002-3GS User Manual

2.1

Start working with VEGA-2002

2.1.1 Accessing the Module Across Wired Network Using the Web
Browser
1. The default IP address of the Ethernet port is 192.168.1.10.
2. Please setup your PC to the same domain to connect VEGA-2002
(192.168.1.x).
3. Start the Web browser on your PC and type in 192.168.1.10 in the URL address
bar.
4. Enter username and password to login Web UI, VEGA-2002 has a default user-
name of admin and default password of admin.
5. The Live page should be displayed as below.
2.1.2

Upgrading Firmware

The VEGA-2002 firmware can be automatically updated by connecting a USB flash
drive to VEGA-2002 using the USB port.
1. Prepare an empty USB flash drive (FAT32).
2. Download or get firmware file from your Advantech contact.
3. Put firmware file, "vega2002_XXXX.upd.xz" to the root directory of your USB
flash drive.
4. Power-OFF the VEGA-2002, insert your USB flash drive to the VEGA-2002 and
remove other devices (LAN & video input source, except the power adapter).
5. Power-ON the VEGA-2002, the firmware upgrading will start automatically.
6. Once upgrade finished, the power button LED will stop blinking and keep in
green.
7. Please remember to remove the USB flash drive. Then, execute a power cycle
by using the power button.
8. Check the software version from Web, System → Information → Software ver-
sion.
VEGA-2002 User Manual 10