Figure 2.5:Figure2-5 Piggyback Stack; Network Connection; Connection To The Devices - Advantech ADAM-6541 User Manual

Piggyback Stack
ADAM-6541 can be stacked as seen in the figure below.
Figure 2.5: Figure2-5 Piggyback Stack

2.5 Network Connection

2.5.1 Connection to the devices

The ADAM-6541 consists of one fiber and one RJ-45 port.
Each of the converter's twisted-pair ports can be used to connect a station
or other device. Use a straight-through twisted-pair cable with RJ-45 con-
nectors on both ends. The twisted-pair cable extended from a twisted-pair
port is called a "twisted-pair segment," that can be up to 100 meters long.
You can connect any RJ-45 (MDI-X) station port on the switch to any
device that uses a standard network interface such as a workstation or
server.
11 Chapter 2