Table of Contents
Advertisement
20.4
Overload protection
L
L
The electricity generated when travelling downhill (when the drive motors act as dynamos) is
directed into the accumulators. If you have fully recharged your electric wheelchair before starting
the downhill stretch the safety system switches to emergency stop in order to prevent damage to
the electrical system (control, electronics, etc.).
L
L
If the overload protection feature is activated (triggered) then this will be indicated by a slow braking
of the electric wheelchair until it stops moving.
20.4.1
Resetting the overload protection:
›
Switch on an electrical device, such as your lighting. The excess electric power will then be quickly con-
sumed.
›
The electric wheelchair is now ready for use once more.
112
20.5
Facility to connect ancillary devices
L
L
The PARAVAN electric wheelchair provides the facility to connect a variety of ancillary devices with
a voltage of 12 or 24 volts to the electric wheelchair's own on-board network.
If you have a need for this facility – for example for a breathing apparatus, please contact PARAVAN GmbH.
The external connections will be made to suit the needs of the affected user and the cable loop will be cut or
relayed as necessary.
)
)
See Section "1.1 Your manufacturer"
Electrical system
Electrical system
113
Advertisement
Table of Contents
