Table of Contents
Advertisement
4.3
Approvals, certifications
4.3.1
EU approval as a driver seat
The anchoring of the safety belt has been certified and approved in ac-
cordance with 76/115/EEC as has the seat in relation to its anchoring
in accordance with 74/408/EWG with the Paravan docking system.
D A N G E R!
Potential risk of injury or serious injury or death
In conjunction with the Dahl Docking system the wheel-
chair has been successfully crash-tested according to
ISO 7176-19:2008 - Wheeled mobility devices for use as
seats in motor vehicles. The test was carried out with vehi-
cle anchored safety belt system only. The integrated 3- or
4-point seat belt should not be used or relied on for occu-
pant restraint in a moving vehicle. Use a vehicle anchored
occupant restraint system instead.
›
Technical Reports Nos. 08-00719-CP-GBM and 08-00723-CP-GBM.
)
)
See Section "23 Annexes and technical documentation"
32
Abb. 4: TÜV Logo
Functional description
4.3.2
Clearance certification as hazardous cargo (accumulator)
PARAVAN GmbH uses accumulators that are rated as "non-hazardous cargo" on condition that the relevant
accumulators are not suffering mechanical damage of any type.
The maintenance-free VRLA accumulators and the equally maintenance-free lead gel accumulators are clas-
sified as leak-proof, non-hazardous cargo for any form of transport according to:
›
IATA, Rule A 67
›
ADR, Rule 238 B
›
IMDG, Rule 238.2
UN 2800 Special Provisions.
)
)
See "Clearance certification as hazardous cargo"
L
L
You will receive the appropriate Clearance certificate for your accumulators during the handover of
your wheelchair.
Functional description
33
Advertisement
Table of Contents
