Use Of The Special Orthopaedic Seat; Setting The Back Support; Setting The Back Support Angle - Paravan PR Heavy Duty User Manual

11.

Use of the special orthopaedic seat

11.1

Setting the back support

11.1.1

Setting the back support angle

The back support and the back support angle can be changed manually.
Optionally, the back support and the back support angle can be changed
electrically using the PARAVAN control.
› Menü in der Steuerung anwählen.
› Einstellung vornehmen.
) )
siehe Kapitel „16 Steuerung"
52
Fig. 18: Rückenlehnenwinkel
Use of the special orthopaedic seat
11.1.2 Setting the head support
If you need the head support position to be change, you can adjust the
height of the head support to your individual needs in 5 stages.
You have the following settings available:
Adjusting head inclination:
› Push the head support  into the required inclination
→ push the head support up backwards or forwards.
Fig. 19: Head support
Height adjustment in five stages:
› Push the head support  into the required stage
→ pull the head support upwards or push it downwards. The
head supports  have five stages.
In order to remove the head support (e.g. at the hairdresser) you must
pull it up over the final stage and pull it free. Do the same in reverse to
replace it.
Use of the special orthopaedic seat
53