Manufacturing Standard - Paravan PR Heavy Duty User Manual

3.1.3 Notes on transport
Material damage to the electric wheelchair through slipping
from ramps or lift while being loaded.
Material damage to the electric wheelchair through being se-
cured and transported improperly in and electric wheelchair
transporter.
› Secure ramp from slippage.
› Both the ramp and the electric wheelchair transporter must
be positioned on even and firm surfaces.
› The ramp or lift must be clean and dry.
› The ramp must be wider than the electric wheelchair and
should be clearly visible to allow corrective steering.
› Mount the ramp and lift in a single movement in order to
prevent the electric wheelchair rolling backwards.
› Secure the electric wheelchair in the transporter according
to the usual legal regulations.
› Use only suitable and authorised securing equipment.
› Switch the electric wheelchair off during transport.
28
C A U T I O N
Functional description
4. Functional description
4.1

Manufacturing standard

The PARAVAN electric wheelchair is a multifunctional electric wheelchair which, due to its compact design,
is ideally suited to both indoor and outdoor usage.
The electric wheelchair is built and tested to ensure the highest possible level of safety for its operator and
his or her immediate environment. Our products are tested for freedom from any flaws after their manufac-
ture. However, if any failure in functioning should appear on your wheelchair, please contact your dealer or
PARAVAN GmbH directly in order to have that failure corrected as quickly as possible.
PARAVAN electric wheelchairs are manufactured and checked in conformity with:
› DIN EN 12184 Electric wheelchairs and scooters and their chargers.
and has been rated by this standard in Category B.
Functional description
29