16.2.7
Driving functions overview
Overview of the driving functions shown on the display of the control
panel during driving, steering and braking actions of the power wheel-
⑤
chair.
②
①
Selected drive program/movement level ①
›
›
Maximum speed in the selected drive program ②
④
›
Key ③ to switch to a higher (+) or lower (-) drive program
③
›
Key ④ to change speed in the drive program
›
Display showing "trip" in kilometres and current speed (km/h) ⑤
Fig. 61: Driving functions
Display is blank when a charging device is connected.
›
If the wheelchair is switched on, the charging status indicator is the
only thing shown.
›
First connect the charging lead for the charging device at the joystick,
then plug the power cable for the charging device into the socket.
L
Fig. 62: Driving function blocked
94
L
If the power wheelchair is being charged via the charging socket
on the control panel, driving mode is automatically blocked.
16.2.8
Select drive program, drive
The power wheelchair must be in driving mode.
›
The last selected drive program is shown on the display.
Press the profile key ① to select/switch to one of the 5 movement
levels (profiles).
›
The selected drive profile will appear on the display.
Press the relevant key to select a higher ② or lower ③ maximum end
speed in the respective drive profile.
›
The preference within the drive profile will appear on the display.
Push the joystick in the direction in which you wish to travel.
›
The power wheelchair moves in the selected direction.
①Move forwards
② Turn to the right
③ Move backwards
④ Turn to the left
)
)
See section "3 Safety notes"
Control
Control
③
①
②
Fig. 63: Select drive program
①
④
②
③
Fig. 64: Joystick travelling direction
95