Avaya 3500 Series Troubleshooting Manual page 110

Troubleshooting authentication
Showing EAPOL port
Review the EAPOL port information.
1. Enter the show eapol port <port#> command to display the information.
2. Ensure that global EAP is enabled and that the port status is eap-auto.
Showing EAPOL multihost
Review the EAPOL multihost information.
1. Enter the show eapol port multihost command to display the information.
2. Note the following:
Formatting non-EAPOL RADIUS password attribute
Make the required changes on the RADIUS server to the password format.
Use vendor documentation to make required changes on RADIUS server to change the format
to IpAddr.MACAddr.PortNumber.
Enabling RADIUS to authenticate non-EAPOL clients
Make the required changes on the RADIUS server to authenticate non-EAP clients.
Apply changes to RADIUS server using vendor documentation.
Showing EAPOL multihost interface
Review the EAPOL multihost information.
1. Enter the show eapol multihost interface <port#> command to display
2. Note the following:
Enabling RADIUS to auth non-EAP MACs
Make the required changes on the RADIUS server to authenticate non-EAP clients
110 Troubleshooting 5.1
Use RADIUS To Authenticate NonEAPOL Clients is enabled
the information.
Allow Auto Non-EAP MHSA: Enabled
Comments? infodev@avaya.com
February 2013