Configure Switch - Avaya 3500 Series Troubleshooting Manual

There are three attributes that the RADIUS server sends back to the NAS (switch) for
RADIUSassigned VLANs. These attributes are the same for all RADIUS vendors:
• Tunnel-Medium-Type – 802
• Tunnel-Pvt-Group-ID – <VLAN ID>
• Tunnel-Type – Virtual LANs (VLAN)

Configure switch

The VLAN must be configured correctly on the Ethernet Routing Switch 3500 Series device.
Task flow Configure switch
The following task flow assists you to configure the VLAN on the device.
Figure 42: Configure switch task
Troubleshooting 5.1
EAP RADIUS VLAN is not being applied
February 2013 99