Avaya 3500 Series Troubleshooting Manual page 103

Showing EAPOL multihost
Display the EAPOL multihost information.
1. Enter the show eapol multihost command to display the information.
2. Ensure that Allow Non-EAPOL clients is enabled.
Enabling allow non-EAPOL clients
Correct the non-EAPOL client attribute.
1. Use the eapol multihost allow-non-eap-enable command to allow non-
2. Ensure that there are no errors after execution.
Showing EAPOL multihost interface
Display the EAPOL multihost interface information.
1. Enter the show eapol multihost interface <port#> command to display
2. Ensure that Allow Non-EAPOL clients is enabled.
3. Ensure that the Multihost status is enabled.
Enabling multihost status and allow non-EAPOL clients
Correct the non-EAP client attribute.
1. Use the eapol multihost allow-non-eap-enable command to allow non-
2. Use the eapol multihost enable command to enable multihost status.
Showing EAPOL multihost non-eap-mac interface
Display the EAPOL multihost interface information.
1. Enter the show eapol multihost non-eap-mac interface <port> command to display
2. Note that the MAC address is in the list.
Troubleshooting 5.1
EAPOL clients.
the information.
EAPOL clients.
the information.
Configured MAC is not authenticating
February 2013 103