Connecting An External Monitor - Siemens SIMATIC Panel PC IL 77 Operating Instructions Manual

• When rejoining the computer unit and the control unit, ensure that the ribbon cable is not
pinched.
Figure 10-17 Separating from the control unit from the computer unit, ribbon cable
10.2.11

Connecting an external monitor

Introduction
When exchanging the control unit or when it fails, operate an external monitor through the
VGA port. You can activate the monitor in the operating system setup.
Panel PC IL 77
Operating Instructions, Edition 10/2004, A5E00339979-01
Maintenance and servicing
10.2 Installing and removing hardware components
10-25