Siemens SIMATIC Panel PC IL 77 Operating Instructions Manual page 16

Hide thumbs Also See for SIMATIC Panel PC IL 77:
Table of Contents

Advertisement

Safety notes and general information
1.2 General Notes
Caution
Condensation
When transporting the device in low temperatures, ensure that no moisture gets on or in the
device. This also applies if the device is subjected to extreme changes in temperature.
Commissioning
Allow the device to slowly adjust to room temperature before commissioning the device. Do
no place the device near heat radiation. If moisture condensation occurs, wait at least about
12 hours before you switch on the device.
Vibration
CD/DVD drives are sensitive to vibration. Prohibited vibration during operation may result in
loss of data or damage to the drive or data medium.
Before transporting the device, wait at least 20 seconds to allow the drive to stop completely.
Updates
Regularly check if hotfixes for your device are available at the Internet site of Siemens AG.
Processor and CD-ROM drive
Caution
Danger of overheating the processor!
Do not activate the "Silent mode" option in the BIOS Setup.
Notice
A CD-ROM drive should only be operated in a mechanically undisturbed environment
without vibrations and shock.
Reistance to chemicals
Caution
Adhere to the notes regarding chemical resistance. This information is available in the
internet at "http://www.ad.siemens.de" under the heading "Products & Solutions." Click on
"Service & Support" under "Services" and look for the article-ID "16532108" on the "Product
Support" page. The desired article about chemical resistance will be displayed.
Sources of light
Notice
Position the screen so that it is not subject to direct sunlight or other strong sources of light.
1-4
Operating Instructions, Edition 10/2004, A5E00339979-01
Panel PC IL 77

Advertisement

Table of Contents
loading

Table of Contents