Table of Contents
Advertisement
4. The following only applies to control units with key panels: Exit the operating system
session and restart the device. Otherwise the "Security features" from "KeyTools" or
"KeyHook" will not be activated.
Warning
Use "KeyTools" as described in the "Additional Drivers and Applications" section of the
"Operation and Configuration" chapter in teh operating instructions.
The following applies when the "Security features" of "KeyTools" is deactivated:
When the additional function keys F13 and S16 are used, or when using your own key
code table, serious malfunctions of the user software can occur because the key codes
behind the function keys can also be activated by activating keys other than the
configured ones.
5. No administrator password is assigned in the factory state. When the logon dialog
appears the next time the device starts up, therefore, leave the field empty and close the
dialog with the "OK" button.
Notice
Then configure an administrator password for security.
The installation of the drivers and applications is complete. Further information is available in
the "Operation and Configuration" chapter of the operating instructions under the section,
"Additional Drivers and Applications."
Notice
After starting up your device, find out more about the particulars of the operating system in
the chapter "Start-up" in the device's operating instructions under the section, "Microsoft
Windows Operating Systems". Further information is available in the chapter "Service and
Maintenance" under the section, "Installing Software."
Panel PC IL 77
Operating Instructions, Edition 10/2004, A5E00339979-01
Commissioning
6.4 Installing drivers and applications
6-5
Advertisement
Table of Contents
