Side Cable Entry; Pole Mounting Kit - Xylem Ai1 Series Quick Start Manual

5.2.5 Side Cable Entry

For bottom mounted locations, such as the pump monitoring in Figure 17, side cable entry may be preferred to
bottom cable entry. In situations like this, a side gland may be fitted
Figure 18 - Side gland cable entry Figure 19 - Internal wiring for side gland entry

5.3 Pole Mounting Kit

A pole mounting kit suits a wide variety of vertical poles, up to 110mm in diameter. The kit includes two stainless
steel clamps on the body of the Ai1, a pair of brackets and a pair of suitably sized stainless-steel clamps for the pole.
Specify the approximate size of the pole clamp at the time of order
The pole mounting kit can also be rotated 90 degrees (and shifted up and down the Ai1
body) for mounting on two horizontal pipes. This image here shows the brackets rotated to
allow for horizontal poles