Getting Started; Sensor Installation And Cable Connection - Xylem YSI ProQuatro Professional Series User Manual

1. Getting Started

1.1
Battery Installation
Figure 1 ProQuatro with battery cover
removed. Notice the battery symbols
indicating polarities.
Sensor Installation and Cable
1.2
Connection
There are multiple cables and sensors that can be used with the ProQuatro. Please refer to the following sections to ensure the
correct cables and sensors are used with the instrument.
The ProQuatro requires (2) alkaline C-cell batteries which are included with the
purchase of a new instrument. Battery life depends on parameters and usage.
Under normal conditions, battery life is approximately 80 hours for continuous use
at room temperature. To install or replace the batteries:
1.
Turn the instrument over to view the battery cover on the back.
2.
Unscrew the four captive battery cover screws.
3.
Remove the battery cover and instal the new batteries, ensuring correct
polarity alignment (Figure
4.
Replace the battery cover on the back of the instrument and tighten the
four screws. Do NOT over-tighten.
4
1).