Table of Contents
Advertisement
Operation
4 - 6
4.3.3 Entry mode
In the entry mode you can change individual values or enter a character
string. Depending on the value type, change a value as follows
Fixed values of a selection list (e.g. sensor measuring ranges):
This is the most frequent form of an entry. Select the required option
with the toggle switch
display switches back to the setting table.
Fig. 4-5
Example of a selection list
Character strings (text and numerals):
The following letters, numerals and special characters can be
entered: AaBb..Zz0..9µ%&/()+-=><!?_ °.
Entries are made character after character. Select the first character
with the toggle switch
the next position and indicates
w
toggle switch
of characters select
completes the entry and the display switches back to the setting
table.
Fig. 4-6
Example of text entry
If you want to correct a previously selected character while entering,
select the thin arrow to the left b and press
entry mark by one digit to the left. Thus you can go back to the
required character. All characters on its right side, however, have to
be entered once again.
If you want to restart entering the characters, select the thick arrow
to the left B and press
w
and confirm the selection with
w
g
and press
P
. Select the next character with the
. When you have selected the required sequence
P
as the following character and press
g
.
System 182-XT-4
g
. The entry mark moves to
g
g
. This moves the
ba76027e02
. The
. This
12/2014
Advertisement
Table of Contents
