PROPELLER SHAFT COMPONENTS
•
Install the clutch dog shifter with the mark "F" toward the
forward gear side.
•
Apply gear oil to the following parts.
•
Push rod pin
•
Push rod
•
Clutch dog shifter sliding area of the propeller shaft
•
Reverse gear thrust washer
•
Reverse gear
•
Reverse gear backup shim
•
Propeller shaft bearings
HPF XR Gearcase Lubricant
•
Apply Triple-Guard grease to the O-ring and the oil seals of
the bearing housing.
Triple-Guard Grease
•
Install the propeller shaft / housing assembly to the gear-
case and tighten the two bolts to the specified torque after
applying Nut Lock to the bolts.
Nut Lock
Propeller shaft bearing housing bolt:
8 N·m (0.8 kg-m; 6.0 lb-ft)
PROPELLER SHAFT COMPONENTS
GEARCASE
8-13