Inspection; Installation - BRP Johnson 4HP Service Manual

MANUAL STARTER

INSPECTION

INSPECTION
NOTE:
If excessive wear, crack, defect or other damage is found on
any component, replace.
•
Inspect the ratchet and the all springs. If excessive wear or
other damage is found, replace.
•
Inspect the reel and the recoil case. If crack or other dam-
age is found, replace.
•
Inspect the recoil rope. If wear or fraying is found, replace.
•
Inspect the recoil spring. If crack, deformation or excessive
curve is found, replace.

INSTALLATION

Installation is reverse order of removal with special attention
to the following steps.
•
Check to ensure that all removed parts are back in plate.
•
Check the neutral start interlock (NSI) function. (See page
5-7)
5-6