Optional Electrical Parts Installation - BRP Johnson 4HP Service Manual

WIRE / HOSE ROUTING

OPTIONAL ELECTRICAL PARTS INSTALLATION

OPTIONAL ELECTRICAL PARTS INSTALLATION
Intake manifold
mounting bolt
VIEW Z
Bracket
Bolt
8 N·m (0.8 kg-m; 6.0 lb-ft)
9-6
NOTE:
Before tightening the battery charge coil bolts, check that the coil is installed in
the correct position.
Visually check the clearances between the inside magnets of the flywheel and
the coil circumference by using the three holes on the flywheel.
Bracket
Cushion
Battery charge coil
Rectifier and
regulator
Fuse case
and 20A fuse
Clamp
Battery charge coil
lead wires
Cut the hatched part of
the grommet.
Clamp
Fix the fuse case and
the lead wires.
Fuel tank bracket
Bolt
10 N·m (1.0 kg-m; 7.0 lb-ft)
Flywheel
Fuel tank bracket
mounting bolt