Gear Oil - BRP Johnson 4HP Service Manual

PERIODIC MAINTENANCE

GEAR OIL

GEAR OIL
CHANGE INITIALLY AFTER 10 HOURS (1 MONTH)
AND EVERY 100 HOURS (6 MONTHS) THEREAFTER.
1. Place the outboard motor upright on a level surface.
2. Place a container under the gearcase.
3. Remove the gear oil drain plug before the gear oil level
plug and drain the gear oil.
4. Fill with the recommended gear oil through the oil drain
hole until the oil just starts to flow out from the oil level
hole.
Gear oil amounts: 190 ml (6.4 / 6.7 US/Imp. oz)
Recommended oil:
HPF XR Gearcase Lubricant
772269 Adapter
5. Install the oil level plug before removing the oil filler tube
from the drain hole.
6. Install the oil drain plug.
Do not re-use the gasket once removed. Always use a
new gasket.
NOTE:
To avoid insufficient injection of the gear oil, check the gear
oil level 10 minutes after doing the procedure in step 6. If the
oil level is low, slowly inject the gear oil up to the correct
level.
2-6
1. Oil level plug
2. Oil drain plug