BRP Johnson 4HP Service Manual page 134

GEARCASE
REMOVAL AND DISASSEMBLY
13. Pull out the shift rod assembly.
14. Remove the driveshaft support housing.
NOTE:
Pry the housing with a screwdriver as shown in the figure.
15. Pull out the driveshaft with the driveshaft support housing
and remove the washer.
16. Take out the following parts.
•
Pinion gear
•
Pinion gear backup shim
•
Pinion gear thrust washer
17. Take out the following parts.
•
Forward gear thrust washer
•
Forward gear
•
Forward gear backup shim
8-4