PowerWalker VFI 10000TCP 3/1 Manual page 11

 High output power factor (0.9), to adapt more type load.
 Intelligent Battery Management technology that uses advanced
battery management to increase battery service life, optimize
recharge time.
 Selectable High Efficiency mode (ECO mode) or CVCF mode
operation.
 Combo input (single phase or three phase) auto detection
 Back-feed protection
 Start-on-battery capability for powering up the UPS even if utility
power is not available.
 Standard communication options: one RS-232 communication port,
one USB communication port.
 Optional connectivity
capabilities.
 Remote shutdown control through the Remote Power-off (RPO)
port.
 For tower PowerWalker VFI 10000-20000 TP 3/1, Maintenances are
simplified by allowing the safe replacement of batteries without
powering down the UPS. But PowerWalker VFI 10000TCP 3/1 model
have no this function.
 N+X parallel redundancy to increase the reliability and flexibility.
The max parallel number is 4.
 User-friendly LCD display and LED indicators.
 For tower PowerWalker VFI 10000-20000 TP 3/1, easily battery
exchange or extension and available to extend the backup time. But
PowerWalker VFI 10000TCP 3/1 model have no this function.
The appearance of tower 3-phase series
Refers to Fig. 3-1
cards with enhanced
8
communication