Loading Passports - Canon imageFORMULA DR-S150 User Manual

Hide thumbs Also See for imageFORMULA DR-S150:
Table of Contents

Advertisement

6
Load the document with the sealed end of the carrier
sheet as the leading edge.
After placing the document, align the document guides with both
edges of the document.
CAUTION
If the document is not placed properly inside the carrier sheet,
you may get a document jam or not get a scan image as
intended.
IMPORTANT
• Insert documents straight into the center of the carrier sheet.
Proper scanning will not be possible if the document is too
close to either side, tilted, or protruding from the carrier sheet.
Yes
No
• The maximum thickness that can be scanned is 127g/m
thickness exceeds 127g/m
to problems such as paper jam.
No
No
2
. If the
2
, the scanner may break down due
• As a rough guide, replace the carrier sheet after 1,000 scanning
operations with a single 80g/m
Carrier sheet is a consumable item. Replace it with a new one
when necessary, if there is visible damage or smudging.

Loading passports

To scan a passport, insert the passport into the separately sold carrier
sheet (for passports) and then place it onto the scanner.
1
Open the scanner driver's Detail Settings screen.
p. 60)
2
Open the [Feeding] tab, and set [Document type] to
[Carrier sheet(for passports)].
31
2
(22 lb bond) sheet inserted.
(See

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents