Sequence Of Operation - Signode AK200HDX-19 Operation, Parts And Safety Manual

3.

SEQUENCE OF OPERATION

3.1 GENERAL
The SIGNODE AK200-HDX is electrically powered and electrically / electronically controlled.
Only one power source is needed to operate the head.
The sequence of operation consists of two major functions. These are:
- First "Strap Feeding"
- Second "Strap Take up", "Strap Tension", "Strap Sealing"
Both functions can be operated on the control panel manually by inching push button.
In addition the function "Shutter Open/Closed" can also be operated manually by inching push
button.
Because of the high resistance from the tension cam it is not possible
to turn the camshaft by hand.
If it necessary to turn the camshaft by hand. Please disconnect first the
strap guide chain.
Remove the release pin (see Rep.58, figure 0464631, page 33) and
swing strap guide wedge inclusive chain (see Rep.10, figure 0464631,
page 33) backwards.
Also please swing out the stop device by pull off the catch pin
(voir Rep.14 + 15, figure 0464643, page 60)
3