Safety Instructions - Draytek VigorAccess User's Installation Manual

Operation Environment
Make sure that the AC power source is in the range of AC 100-240V.
The IP DSLAM should be used in a sheltered area, within a temperature
range from 0 to +50 °C and relative humidity in the range of 10% and 90%.
DC power source operating condition: -42 to –56VDC. Do not expose the
IP DSLAM to direct sunlight or other heat sources. The housing and
electronic components may be damaged by direct sunlight or heat sources.
Installation
Read the quick start guide and installation manual before turning on the
power switch of device.
Locate the emergency power-off switch near the device prior to power
connection.
Fixing the device on chassis to maintain air circulation and stable condition
is recommended.
Do not work alone if the operation environment is dangerous.
Check and avoid the potential hazard for moist environment, and grounding
issue for power cable.
Please turn off the power switch when replacing fuse, installing or removing
chassis.
Do not place the device in a damp or humid place, e.g. a bathroom- (such as
this environment).
Avoid operating cable connection during lightning period.
When you want to dispose of the IP DSLAM, please follow local
regulations on conservation of the environment.
Maintenance
Users can replace fuses by removing the module and replace it when
necessary. Other components should be repaired by authorized and qualified
personnel. Do not try to open or repair the device by yourself.
The fuse for AC power inlet should be identical to the following standard:
250VAC, 2A
VigorAccess User Installation Guide
S
AFETY
8
I
NSTRUCTIONS