Table of Contents
Advertisement
In this chapter, we will introduce the installation, cable type, and LED indications in
IP DSLAM.
This chapter is divided into the following sections,
Section 2.1: System Connection Description
Section 2.2: IP DSLAM Master Setup
Section 2.3: IP DSLAM Slave Setup
2.1 System Connection Description
There are following steps to setup the IP DSLAM connection:
Master rack-mounting setup
Slave rack-mounting setup
Interconnect master and slaves
Line interface connection
Phone interface connection
After the previous steps, the system will construct as shown in Figure 2-1.
VigorAccess User Installation Guide
31
CHAPTER
Installation
2
Advertisement
Table of Contents
