Draytek VigorAccess User's Installation Manual page 64

4.3.11 How to Remote Upgrade Control Plane Code
Commands are shown as below:
Prepare tftp server
Prepare vendor supplied CP.bin.gz
Put CP.bin.gz into root directory of tftp server
$list
Name
------------------------------------------------------------------------------------------------------
/nvram/bin/bootptftp/
TftpBootp.bin
/nvram/bin/control/
CP.bin.gz
/nvram/bin/dataplane/
DP.bin.gz
/nvram/bin/decompressor/
Decompressor.bin
$remove fname /nvram/bin/control/CP.bin.gz version 1
$download src CP.bin.gz dest /nvram/bin/control/CP.bin.gz ip <server-ip>
$list
Name
-------------------------------------------------------------------------------------------------------
/nvram/bin/bootptftp/
TftpBootp.bin
/nvram/bin/control/
CP.bin.gz
/nvram/bin/dataplane/
DP.bin.gz
/nvram/bin/decompressor/
Decompressor.bin
NOTE: the Ver of CP.bin.gz becomes 2
NOTE: the State of CP.bin.gz becomes "Latest"
$upgrade fname /nvram/bin/control/CP.bin.gz version 2
NOTE: the State of CP.bin.gz becomes "active"
$reboot
VigorAccess User Installation Guide
Ver Time
1 Mon Aug 23 16:52:58 2004
1 Mon Aug 23 16:52:58 2004
1 Mon Aug 23 16:52:58 2004
1 Mon Aug 23 16:52:58 2004
Ver Time
1 Thu Aug 26 18:31:22 2004 110008
2 Thu Jan 01 00:13:28 1970 1467204
1 Thu Aug 26 18:31:22 2004 252784
1 Thu Aug 26 18:31:22 2004 81160
64
Size Acc State
110008 RO active
1467208 RW active
252784 RW active
81160 RO active
<-- depends on real status
Size Acc State
RO active
RW Latest
RW active
RO active
<-- depends on real status