Draytek VigorAccess User's Installation Manual page 56

VigorAccess User Installation Guide
4.1.1.3 Routing Table
Users can use the following commands to configure the default route and some static
routes.
- Enter network directory
Admin> network
- Help
Admin/network> route ?
- Display the routing table
Admin/network> route –r
- Display the static route entries.
Admin/network> route -s
- Add a default route
Admin/network> route default <RtIP>
- Delete the default route
Admin/network> route default 0.0.0.0
- Add a static route entry
Admin/network> route -a <TargetIP> <NetMask> <GatewayIP>
- Edit the static route entry
Admin/network> route -e <RtIdx> <TargetIP> <NetMask> <GatewayIP>
- Delete the static route entry
Admin/network> route -d <RtIdx>
- Delete all static route entries
Admin/network> route -D
4.1.2 Configure NTP and Time
Users can use the following commands to configure the NTP server IP and the polling
interval or not to use the NTP by configuring the current time settings manually,
including the time zone and the daylight saves time.
- Enter service directory
Admin> service
- Display the settings
Admin/service> ntp –s
- Help
Admin/service> ntp ?
56