Draytek VigorAccess User's Installation Manual page 55

VigorAccess User Installation Guide
4.1.1 Configure the IP Address
4.1.1.1 Inband IP Address
Users can use the following commands to configure the inband IP address for the UP-
LINK interface or inband management.
- Enter network directory
Admin> network
- Help
Admin/network> inband ?
- Display the settings
Admin/network> inband -s
- Edit the inband IP address without VLAN
Admin/network> inband <IP_addr> <NetMask>
- Edit the inband IP address with VLAN
Admin/network> inband <IP_addr> <NetMask> <vlan_id>
4.1.1.2 Outband IP Address
Users can use the following commands to configure the outband IP address for
outband management.
- Enter network directory
Admin> network
- Help
Admin/network> outband ?
- Display the settings
Admin/network> outband -s
- Edit the outband IP address without VLAN
Admin/network> outband <IP_addr> <NetMask>
- Edit the outband IP address with VLAN
Admin/network> outband <IP_addr> <NetMask> <vlan_id>
55