Configuration - Syslog - Gude Expert Power Control NET 8x 8211 Manual

Expert Power Control NET 8x 8210 / 8211
4.3.7.2 Trap Version
Here you can choose between SNMP-traps standard v1 and v2c.
Use SNMP only if your network is fitted for.
More information about the SNMP functions of Expert Power Control NET 8x 8210 / 8211, you can find in chapter SNMP, on
http://www.gude.info/wiki or ask our support team.
4.3.8

Configuration - Syslog

Syslog messages are simple text messages transmitted to a syslog server using UDP.
Linux OS regularly have a syslog daemon installed, e.g. syslog-ng. For Windows there are some freeware tools available.
On following events, Expert Power Control NET 8x 8210 / 8211 will send a syslog message:
- Booting up
- Activation/deactivation of syslog
- Switching of Power Ports
You can find more information about configuration of Syslog in chapter Configuration - Syslog or have a look at http://www.
gude.info/wiki.
4.3.8.1 Enable Syslog
Here you can activate Syslog of Expert Power Control NET 8x 8210 / 8211.
4.3.8.2 Syslog Server IP
If syslog is active enter here the IP address of you Syslog server.
4.3.8.3 Syslog Port
If syslog is active enter here the port number, that your Syslog server uses to receive syslog information.
More information about Syslog you can find in chapter Syslog, on http://www.gude.info/wiki or ask our support team.
17
Configuration