Table of Contents
Advertisement
Expert Power Control NET 8x 8210 / 8211
4.3.6.2
Enable SNMP-get
Here you can activate SNMP-get protocol of Expert Power Control NET 8x 8210 / 8211.
Use SNMP only if your network is fitted for.
4.3.6.3
Community public
Here you can enter the SNMP public community.
Use SNMP only if your network is fitted for.
4.3.6.4
Enable SNMP-set
Here you can activate SNMP-set protocol of Expert Power Control NET 8x 8210 / 8211.
Use SNMP only if your network is fitted for.
4.3.6.5
Community private
Here you can enter the SNMP private community.
Use SNMP only if your network is fitted for.
4.3.6.6
Download SNMP MIB
Here you can download the MIBs of Expert Power Control NET 8x 8210 / 8211.
Use SNMP only if your network is fitted for.
4.3.7
Configuration - SNMP Trap Receiver List
4.3.7.1
Enable Traps
Here you can activate SNMP-traps. if enabled, Expert Power Control NET 8x 8210 / 8211 will dispatch SNMP-traps to all
receivers listed. Receivers have to be listed as follows: IP address (and, if necessary the HTTP port), e.g.: 192.168.0.2:8000
Use SNMP only if your network is fitted for.
16
Configuration
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Expert Power Control NET 8x 8211 and is the answer not in the manual?
Questions and answers