Tp Search; Tp Ide - ADInstruments DTVLINK-5 User Manual

4.4.1 TP Search

Main Menu-> CATV ->TP Search
In this menu, you can Delete, Add, Search Channels.
- TP: Highlight the TP, press the ◄/► button to switch TP or press the ok button to enter TP list, then select TP. In
the TP list, you can press the ◄/► button to switch TP one by one, and press ▲/▼ button to Page up/down TP list.
You also can enter channel number to select TP.
- Search Channel: Press the ◄/► button to change search type, you can select manual search, network search,
auto search, blind search.
- Delete: Highlight the TP and select the TP, then press F1 button to delete TP
- Add: Press F2 button to add TP.
- Manual Search: Press F1 button to search channels from the selected TP.
- Auto Search: Press F4 button to search channels of all TP.
- Network Search: It will go to search automatically from the selected TP.
- Blind Search: A slow scanning, but may get more transponders.

4.4.2 TP IDE.

Main Menu-> CATV ->TP IDE.
In this menu, you can know the exact information about the transponder which you selected. You also can execute Delete
and Add transponder, Manual Search and Network Search.
AD INSTRUMENTS
- MER: Modulation error rate.
- Pre BER: Forward error correction.
- Post BER: Afterward error correction.
15
DTVLINK-5 User manual