Motor; Spectrum - ADInstruments DTVLINK-5 User Manual

Table of Contents

4.2.5 Motor

Main Menu-> Satellite -> Motor

Highlight the Motor and press ok button to enter the motor search. In this menu, you also can execute Delete, Add, and

Move to and Rename satellite and Delete, Add, Delete, and Edit transponder and Edit PID.

Note

After enter setup menu, you should turn your

Main Menu-> Satellite -> Spectrum

In this menu, you can know the strength of all transponders.

Note:

After insert USB, you can press OK button to save or load the data of spectrum. If you select saving the data, you

can press OK button or exit button to close the save. Then you can find "spectrum_file_001.txt "in your USB. If you select

Loading, you need to load the" spectrum_file_001.txt"in your USB, and then you can see the previously saved spectrum

data.

Press the F1 button to keep the spectrum, and press the F2 button to analyze spectrum, and press the F3 button to mark

spectrum, and press F4 button to next page.

AD INSTRUMENTS

- West/East: Press F1 button to turn Motor to west and

press F2 button to turn Motor to east.

- Start Search: After configure the antenna setting, press

the F3 button to TP search.

- Setup: If you set the motor mode to USALS, you need

press F4 button to set the longitude and latitude.

- Motor mode: Highlight the Motor and press the ◄/►

button to select DiSEqC1.2 or USALS.

machine until it is show the compass.

DTVLINK-5 User manual

Table of Contents