Tp Ide; Packet Control - ADInstruments DTVLINK-5 User Manual

- Search Channel: Press the ◄/► button to change search type, you can select manual search, auto search.
- Delete: Highlight the TP and select the TP, then press F1 button to delete TP
- Add: Press F2 button to add TP.
- Manual Search: Press F1 button to search channels from the selected TP. You will be asked to confirm whether
only search FTA channels or not, if you select "Yes", you will only search FTA channels. You also will be asked to
confirm whether network search or not, if you select "Yes", it will go to search automatically and save the found
channels when the search is completed.
- Auto Search: Press F4 button to search channels of all TP. You will be asked to confirm whether Network
Search or not, if you select "Yes", it will go to search automatically and save the found channels when the search is
completed.

4.3.2 TP IDE.

Main Menu-> Terrestrial ->TP IDE.
In this menu, you can know the exact information about the transponder which you selected. You also can execute Delete
and Add transponder, Manual Search and Auto Search.
- Modulate: Modulation efficiency.
- FFT Mode: Fast Fourier Transform

4.3.3 Packet Control

Main Menu-> Terrestrial ->Packet Control
In this menu, you can know the strength and quality of each transponder.
AD INSTRUMENTS
- MER: Modulation error rate.
- SNR: It will show the carrier to noise ratio of the
transponder which you selected.
- CBER: Forward error correction.
- VBER: Afterward error correction.
- Power: It will show you the strength of the
transponder what you selected.
13
DTVLINK-5 User manual