Fingerprint Reader - HP ENVY 13 Maintenance And Service Manual

Fingerprint reader

Table 5-7 Fingerprint reader and cable descriptions and part numbers
Description
Fingerprint reader for use in natural silver models
Fingerprint reader for use in pale gold models
Fingerprint reader cable
Before removing the fingerprint reader, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the fingerprint reader:
1. Remove the Phillips M2.0 × 2.0 screw (1) that secures the fingerprint reader bracket, and then remove
the bracket (2).
2. Disconnect the fingerprint reader cable from the ZIF connector on the system board (3).
3. Remove the fingerprint reader (4).
Reverse this procedure to install the fingerprint reader.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 27).
24).
25).
Component replacement procedures
Spare part number
L52651-001
L53389-001
L53363-001
33