Fan - HP ENVY 13 Maintenance And Service Manual

Fan

Table 5-10 Fan description and part number
Description
Fan (includes gasket)
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Disconnect the battery (see
Remove the fan:
1. Disconnect the fan cable from the system board (1).
2. Remove the two Phillips 2.0 × 3.0 screws (2) that secure the fan to the computer, and then remove the
fan (3).
Reverse this procedure to install the fan.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 27).
24).
25).
Component replacement procedures
Spare part number
L53386-001
39