Usb Door - HP ENVY 13 Maintenance And Service Manual

USB door

Table 5-11 USB door descriptions and part numbers
Description
USB door for use in natural silver models
USB door for use in pale gold models
Before removing the USB door, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
Remove the USB door:
Push the USB door into the computer (1), and then pull it away from the computer to remove it (2).
▲
TIP:
Reverse this procedure to install the USB doors.
TIP:
When installing the USB door, align the door over the USB port and gently push it into the computer so
the clip on the bottom of the door catches the top of the USB port.
IMPORTANT:
door.
40 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
A clip on the bottom of the USB door attaches to the top of the USB port.
Using too much force when installing the USB door may break the clip on the bottom of the
(Preparation for disassembly on page
25).
Spare part number
L53395-001
L53396-001
24).