Power Connector - HP ENVY 13 Maintenance And Service Manual

Power connector

Table 5-14 Power connector description and part number
Description
Power connector
Before removing the power connector, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the solid-state drive (see
5.
Remove the WLAN module (see
6.
Remove the fan (see
7.
Remove the system board (see
Remove the power connector cable:
▲ Disconnect the power connector cable from the system board.
Reverse this procedure to install the power connector cable.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 27).
Solid-state drive on page
WLAN module on page
Fan on page 39).
System board on page
24).
25).
28).
29).
41).
Component replacement procedures
Spare part number
L53365-001
45